|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
This is the most complete solution for surveillance in combat conditions.
The system is equipped with a powerful daytime camera with x36 optical zoom and a built-in thermal imaging module, which allow for effective video surveillance both day and night.
The control panel is built into a protected case with a 16-inch screen, all controls are concentrated in one place.
Remote switching on/off of the thermal imager and control of its zoom are supported.
The system is completely wired - video transmission, control and power supply are carried out through a single cable, which eliminates the possibility of detection by electronic means.
Technical specifications
Rotation angle:
• horizontal: 360°
• vertical: from -30° up to +90°
Dimensions:
• swivel mechanism: 120 × 80 × 140 mm
• protected case (remote control): 460 × 400 × 270 mm (with reel and tripod)
Weight: 10 kg
Tripod height: 1500 mm
Monitor: 16 inches
Power: 12/220 V or FPV battery up to 38 V
Controls:
• rotation - joystick
• zoom - encoder
Transmission:
• video and control signals — via cable
• camera/thermal imager switching — from remote control
• digital video output (video capture card) — yes
Video recording: not provided
Connection to gadgets: via video capture card
• PAL: 720 x 576 @ 25 fps
• NTSC: 720 x 480 @ 30 fps
Interface: aviation connectors, Type-C, XT60
Case protection:
• swivel mechanism: IP67
• Remote control (case): IP65
Materials:
• Rotating mechanism - plastic
• Remote control - plastic
• Optics mount - aluminum
• Tripod - Aluminum
Remote charging of the thermal imager: yes
Azimuth indicator: manual setting (without GPS)
Trunk cable (default): 20 m (twisted pair)
Characteristics of the day module
Objective lens diameter: 30 mm
Optical zoom: 36×
Sensor: 1/2.7", effective area > 6.8 mm
Focal length: 5.85 ±5% ~ 93.6 ±5% mm
Aperture: f/1.8 ~ f/3.9
Effective viewing range:500-700 m
Thermal imaging module specifications
Detector: 384 × 288 px, 12 μm
Lens: 35 mm
Frame rate: up to 50 Hz
Display: OLED 1024 × 768
Zoom: Digital 1–6×
NETD Sensitivity: < 40 mK
Human detection range: ~700-1000 m
Power consumption
Standby with camera + module: 1400 mA / 17 W
Operation (2-axis rotation): 3100 mA / 37 W
Package contents
Rotating head
150 cm tripod or mounting stud
Day camera with optical zoom
Built-in thermal imaging module
Trunk cable (20 m, extendable to 70 m)
Rugged case with built-in 16" display
Control panel (joystick, encoders)
Power cable
FPV battery (optional)
Power supply from 220 V (on request)
Cable for connecting a video capture card
Bolts and mounts for the thermal imager and camera
Frame rate: up to 50Hz
Display: OLED 1024 × 768
Zoom: digital 1–6×
NETD sensitivity: < 40 mK
Human detection range: ~700-1000 m
Power consumption
Standby with camera + module: 1400 mA / 17 W
Operation (2-axis rotation): 3100 mA / 37 W
Package contents
Rotating head
150 cm tripod or mounting stud
Day camera with optical zoom
Built-in thermal imaging module
Trunk cable (20 m, extendable to 70 m)
Rugged case with built-in 16" display
Control panel (joystick, encoders)
Power cable
FPV battery (optional)
Power supply from 220 V (on request)
Cable for connecting a video capture card
Bolts and mounts for the thermal imager and camera
35mmFrame rate: up to 50Hz
Display: OLED 1024 × 768
Zoom: digital 1–6×
NETD sensitivity: < 40 mK
Human detection range: ~700-1000 m
Power consumption
Standby with camera + module: 1400 mA / 17 W
Operation (2-axis rotation): 3100 mA / 37 W
Package contents
Rotating head
150 cm tripod or mounting stud
Day camera with optical zoom
Built-in thermal imaging module
Trunk cable (20 m, extendable to 70 m)
Rugged case with built-in 16" display
Control panel (joystick, encoders)
Power cable
FPV battery (optional)
Power supply from 220 V (on request)
Cable for connecting a video capture card
Bolts and mounts for the thermal imager and camera
~700–1000 mPower consumption
Standby with camera + module: 1400 mA / 17 W
Work (2-axis rotation): 3100 mA / 37 W
Package contents
Pan/Tilt head
150 cm tripod or mounting stud
Day camera with optical zoom
Built-in thermal imaging module
Trunk cable (20 m, extendable up to 70 m)
Protected case with built-in 16" display
Control panel (joystick, encoders)
Power cable
FPV battery (optional)
Power supply from 220 V (on request)
Cable for connecting a video capture card
Bolts and mounts for the thermal imager and camera
~700–1000 mPower consumption
Standby with camera + module: 1400 mA / 17 W
Work (2-axis rotation): 3100 mA / 37 W
Package contents
Pan/Tilt head
150 cm tripod or mounting stud
Day camera with optical zoom
Built-in thermal imaging module
Trunk cable (20 m, extendable up to 70 m)
Protected case with built-in 16" display
Control panel (joystick, encoders)
Power cable
FPV battery (optional)
Power supply from 220 V (on request)
Cable for connecting a video capture card
Bolts and mounts for the thermal imager and camera
Encoders)Power cable
FPV battery (optional)
Power supply from 220 V (on request)
Cable for connecting a video capture card
Bolts and mounts for the thermal imager and camera
Encoders)Power cable
FPV battery (optional)
Power supply from 220 V (on request)
Cable for connecting a video capture card
Bolts and mounts for the thermal imager and camera