High-Capacity Battery — a solution for extending the drone’s flight time. With a capacity of 15,800 mAh, it provides up to 60 minutes of hovering under the test conditions specified. The battery allows the drone to be used for longer without replacing the battery and is suitable for flights where extended autonomy is important.

1. CHARGE LEVEL INDICATION

During flight with this battery, monitor the battery voltage rather than the charge percentage.

Correspondence between voltage and charge level:

• 16.5 V — 100% charge
• 15.2 V — 75% charge
• 14.2 V — 50% charge
• 13.0 V — 25% charge
• 11.2 V — 0% charge

Note: during flight, if the battery charge percentage suddenly reaches 0% and the drone signals that landing is required, there is no need to panic. Simply raise the throttle stick to continue controlling the flight. Similarly, even if the charge indicator does not return to zero and gradually reaches 0%, you can continue flying. During flight, monitor the battery voltage specifically.

2. FLIGHT TIME INFORMATION

Regarding the operating time of this battery: according to the results of our actual tests, the hovering time is approximately 60 minutes.

If low-noise propellers are used or the drone carries a payload, the flight time will naturally decrease.

3. COMPARISON WITH THE ORIGINAL BATTERY

Comparison of flight time using the original battery and the high-capacity battery.

• The capacity of the original battery is 6741 mAh. Under the same conditions, the actual hovering time during testing (voltage 16.5–11.2 V) was approximately 40 minutes.
• The capacity of the high-capacity battery is 15,800 mAh. Under the same conditions, the actual hovering time during testing (voltage 16.5–11.2 V) was approximately 60 minutes.

Compared with the original battery, the high-capacity model provides approximately 20 minutes of additional flight time.