|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
6S3P 12500 mAh Battery on the Molicel P42A: Energy for Long and Heavy Missions
In the conditions of modern drone warfare, the success of an operation depends on two factors: payload and range. The 6S3P 12500 mAh battery assembly based on premium Molicel P42A elements is the energy core for heavy FPV drones (9-10 inches) and repeaters. When you need to deliver the maximum payload over a distance of 15-20 km or more, this battery provides the necessary power reserve and stable voltage until the last second of flight.
We don't just assemble batteries - we implement engineering solutions that increase the efficiency of your equipment. Thanks to the use of combined copper-nickel welding, our batteries have 10-12% lower internal resistance than competitors, which is critical when operating under the influence of enemy electronic warfare.
Why is the Molicel P42A the gold standard for the front?
Unlike conventional Li-Ion cells, Molicel P42A (21700) are designed for extreme loads. They demonstrate better stability at high discharge currents, which allows the pilot to perform sharp maneuvers even at a low charge level.
- High current output: A constant discharge current of 135 A allows you to work with heavy ammunition without the risk of voltage sag.
- Extreme temperatures: An operating range from -40 ° C to + 60 ° C guarantees reliability both during winter operations and in the summer heat.
- Durability: Molicel cells withstand more intensive discharge cycles without loss of capacity compared to similar ones.
Technological advantage: Copper-nickel welding
Most manufacturers use pure nickel, which has high resistance. Our assemblies are welded using Copper + Nickel technology:
- Connection resistance is 6 times lower than pure nickel.
- Overheat protection: The battery heats up less under peak loads, which extends the service life of the cells.
- Efficiency: Less energy is wasted on heating the contacts - more energy goes to the motors, adding precious minutes to flight time.
Technical and tactical characteristics (TTX)
The battery is designed for professional use.The parameters are designed for maximum performance in combat conditions.
| Parameter | Parameter value |
|---|---|
| Battery type | Li-Ion (Molicel P42A, 21700) |
| Configuration | 6S3P |
| Capacity | 12500 mAh (12.5 Ah) |
| Discharge current (constant) | 135 A |
| Pulse discharge (up to 5 sec) | 170 A |
| Charge current (standard/max) | 2 A / 4 A |
| Weight | 1435 g |
| Temperature range (discharge) | from -40°C up to +60°C |
| Assembly resistance | 10-12% lower than market analogues |
Power system and connectors
We understand the specifics of connections on different types of frames, so we offer flexibility in the choice of fittings:
- Main connector: Standardly installed XT-60H-F with 12AWG cable.
- Option "Heavy Duty": Upon request, we install XT-90 and 10AWG cable for systems with extreme consumption.
- Balancing connector: Standard JST-XH 2.54 with a durable, kink-resistant 22AWG cable.
Expert Advice: With the assembly weighing 1.4 kg, careful centering on the drone frame is recommended to maintain maneuverability. The use of a copper-nickel connection allows you to confidently squeeze the maximum out of the battery during the final acceleration to the target.
Advantages for Tactical Aviation Units
The 6S3P 12500 mAh battery is the optimal balance between weight and airtime:
- Increased Range: Allows you to engage targets deep behind enemy lines.
- Reliable Communication: Stable voltage ensures clean operation of the video transmitter and control system.
- Versatility: Suitable for 10-inch kamikazes, reusable drops, and ground stations.
Conclusion: Power that won't let you down.
The 6S3P 12500 mAh battery on the Molicel P42A is an uncompromising solution for those who are not used to half measures. Unique welding technology and premium components make this battery the most reliable source of power for your drones. See further, fly longer, hit more accurately.
Tactical FAQ: Power “Atlant” 6S3P 12500 mAh (Molicel P42A)
1. Why is the Molicel P42A better than the Samsung 30Q or Sony VTC6?
For you as a photographer, it's like a pro camera versus an amateur one. The Molicel delivers 45 A per battery, while the 3P assembly delivers 135 A. The drone won't "sag" in current even when taking off with a heavy BC. A stable impulse is the key to a long life for your motors.
2. What's the actual flight time on a 10-inch kamikaze?
With a payload of $2.5\text{--}3\text{ kg}$, you'll get $18\text{--}22\text{ minutes}$. Without ammo (reconnaissance) — up to $40\text{ minutes}$. This is your ticket to the deep rear for $20+\text{ km}$. In Bannerlord, this would be a unit with infinite endurance for a long siege.
3. Weight of 1.2 kg and drone controllability?
This is a heavy "brick". The drone will become as inert as a loaded pickup truck. Secure the battery with two straps! Shifting the center of mass will make your stick movements smoother, just like when shooting video from a heavy shoulder rig.
4. Charging from your EcoFlow Delta 2?
Capacity is $270\text{ Wh}$. Your EcoFlow Delta 2 will handle 3–4 full cycles. Charge with $12\text{ A}$. While the drone is "gaining strength", you can study the anatomy chapter of "Krok 1" on your ASUS TUF.
5. Why is 3.2 V the "point of no return"?
Molicel can be pushed up to 2.5 V, but in a real fight, after 3.2 V, the voltage drops instantly. Set the OSD to 3.3 V. As a future medic, you understand: this is like a critical drop in oxygenation - if you don't take action within a minute, the system will "die".
6. Reliability and 18 cells in a single bundle?
The assembly lasts for 500+ cycles and doesn't overheat. But it's important to keep all 18 cells balanced. If one fails, the entire power supply will drop. Regularly checking on a laptop will ensure the drone doesn't fail at the most crucial moment.