Maximum UAV Signal Enhancement in Electronic Warfare Environments

AvengeAngel Super Hulk is a professional active remote antenna with built-in amplifiers designed to increase UAV control range and stabilize the video link in complex radio-frequency environments.

This solution is engineered for situations where standard antennas are no longer effective: urban areas, difficult terrain, active electronic warfare (EW), and remote operation from protected positions or shelters.

Key Advantages

Up to 30 W of output power per channel — real amplification, not marketing claims
Dual-band operation: 2.4 GHz + 5.2–5.8 GHz
Narrow beamwidth (10–18°) — focused signal directed toward the target area
Low-noise reception (LNA) — stable video transmission without freezing
RX/TX switching ≤ 9 μs — virtually no control latency
Amplifier protection with circulators — stable performance even under poor impedance matching
IP68-rated enclosure — reliable operation in rain, dust, and harsh field conditions

Tactical Applications

FPV and digital UAV systems
DJI (OcuSync) / Autel
Ground control stations
Operation from shelters (remote antenna deployment to the position)
Mitigation of electronic warfare interference

Provides 2× to 3× communication range increase depending on operating conditions

Technical Specifications

Antenna System

Type: Microstrip panel antennas
Quantity: 4 units
Frequency Bands:
2.4 GHz
5.2–5.8 GHz
Polarization: Linear
VSWR: 1.3–1.5 (optimized)
Beamwidth:
~18° (2.4 GHz)
~10° (5 GHz)

Transmitter Amplifier (TX)

Maximum Output Power:
up to 44.8–45.2 dBm (~30 W)
Operating Bands:
2360–2590 MHz
5180–6000 MHz
Architecture:
Two-stage design (integrated circuit + LDMOS)
Saturation begins after approximately 15–20 dBm input power

Receiver (RX / LNA)

2.4 GHz: ~4.2–8 dBm
5 GHz: ~11–17 dBm
SNR Improvement: Yes
Video Stability: Yes

Switching

RX ↔ TX: Automatic
Switching Time: ≤ 9 μs

Power Supply

Input: AC 176–264 V
Output: DC 28 V
Maximum Power Consumption: up to 350 W
Current Draw: up to 4 A

Construction

Enclosure:
Top: RF-transparent plastic
Bottom: Aluminum (heatsink and shielding)
Connectors:
External: N-type
Internal: SMA
Ingress Protection: IPX68
Cooling: Passive