|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Digital FPV video system Caddx Walksnail Avatar HD Pro Kit Dual V2: Maximum detail and night advantage
In today's aerial reconnaissance and strike missions, video quality is crucial. Walksnail Avatar HD Pro Kit Dual V2 is a next-generation digital system that sets the highest standards for clarity and reliability. With an updated VTX with two antennas and a camera with the highest light sensitivity, this kit provides a stable signal at long distances and allows you to work effectively in deep twilight.
The Dual V2 version is designed for professionals who need uncompromising 1080p image quality and expanded memory for recording the results of target engagements.
Key advantages of the Avatar HD Pro Dual V2 system for tactical use
This kit gives the operator a technical advantage over analog and outdated digital systems due to the following innovations:
- Extreme light sensitivity (0.001 Lux): The Pro version camera is capable of transmitting a clear image even in twilight, which allows you to carry out missions at a time when the enemy believes himself to be protected by darkness.
- Dual Antenna System: The presence of two antennas (IPEX-1) on the video transmitter significantly improves the penetration ability signal and link stability when maneuvering or flying in interference conditions.
- Gyroflow support: Built-in 32 GB memory allows you to record gyro data for subsequent video stabilization, which is critical for obtaining a smooth picture when identifying objects.
- Ultra-low latency: An average latency of 22 ms provides an instant control response, which is necessary for precise kamikaze guidance or quick piloting between obstacles.
Technical and tactical characteristics (TTX) of the Pro Dual V2 kit
The system is compatible with most modern flight controllers and supports full telemetry output via OSD Canvas.
1. Avatar HD Pro Camera Specifications
| Parameter | Characteristic value |
|---|---|
| Sensor | 1/3.2-inch 4 MP (4:3 aspect ratio) |
| Resolution | 1080P/120fps; 1080P/60fps; 720P/100fps |
| Minimum illumination | 0.001 Lux (High Sensitivity) |
| Viewing angle (FOV) | 160° |
| Lens | 2.1 mm, F2.0 aperture |
| Camera weight | 7.2 g |
2. Video transmitter (VTX) V2 specifications
| Parameter | Characteristic value |
|---|---|
| Communication frequency | 5.725-5.850 GHz |
| Power (EIRP) | FCC: <30 dBm (up to 1 W) |
| Built-in memory | 32 GB (with Gyroflow support) |
| Input voltage | 6 V - 25.2 V (2S-6S LiPo) |
| Mounting Holes | 20x20 mm; 25.5x25.5 mm |
| VTX Weight | 17.6 g |
Antenna and Communication System Efficiency
The kit comes with two LHCP antennas, which provide optimal performance in the Walksnail Avatar digital band.
- Frequency Range: 5600–6000 MHz for a stable signal in noisy airwaves.
- Gain 1.9 dBi: Balanced coverage for medium to long range operation.
- Compactness:The R15 x 45 mm antenna size allows for convenient placement on the drone frame to minimize shielding effects.
Tactical Note: Support for OSD Canvas mode allows critical telemetry (GPS coordinates, voltage, flight time) to be displayed directly on the goggles, making it easier for the operator to navigate in challenging conditions.
Why choose the Walksnail Avatar HD Pro Kit Dual V2?
The Pro Dual V2 version is the "golden mean" for attack and reconnaissance FPV systems. You get not only a digital signal without "snow" and interference, but also the ability to operate in conditions where analog cameras can no longer see the target. A reinforced 32GB data transfer stack ensures that no crucial mission moment is lost due to memory overflow.
- Wide compatibility: Works with Betaflight, INAV, ArduPilot, Kiss, and Fettec.
- Temperature resistance: An operating range of -20 to +40 ℃ allows for year-round use.
- Power reliability: Wide voltage (up to 6S) allows the VTX to be connected directly to the battery.
Conclusion: Your intelligence advantage
The Caddx Walksnail Avatar HD Pro Kit Dual V2 digital FPV video system is an investment in mission success and unit safety. 1080p clarity, 0.001 Lux night sensitivity and a dual antenna make this kit the best choice for operators who value quality, reliability and a technological advantage over the enemy.
Tactical FAQ: Walksnail Avatar HD Pro Kit Dual V2 Digital System
What is the main feature of the "Dual V2" version?
This is a reinforced version of the digital transmitter (VTX), equipped with two antennas instead of one. This is critical for your long-range flights: the second antenna provides a much more stable signal when the drone maneuvers, minimizing connection "dead zones" when the drone turns sideways or with its tail towards you.
What are the capabilities of the "Pro" camera? What's in this kit?
The camera is equipped with a Sony Starvis II sensor, which offers extremely high light sensitivity. As a photographer, you'll appreciate its performance in twilight: it sees much more detail in dark areas than typical FPV cameras, allowing you to complete missions even in minimal moonlight.
What power and range does this module provide?
The V2 version supports an output power of up to 1200 mW. Combined with your Walksnail Avatar Repeater and directional antennas, you can confidently fly at a distance of 10-15 km with crystal-clear digital pictures in 1080p.
Does this system support built-in recording (DVR)?
Yes, the VTX module has a built-in 32 GB memory. This allows you to record flight video in original quality right on board the drone. This is your "digital proof" or portfolio material that is not affected by radio interference.
What improvements are implemented in the V2 design?
Compared to the first version, the Dual V2 has improved cooling and surge protection. The mounting holes are now universal (20x20mm and 25x25mm), which makes it easy to install this module on your 7-inch and 10-inch "Baby" rigs.
What supply voltage does the Dual V2 support?
The system operates in the range of 6V - 25.2V (2S - 6S LiPo). This is perfect for your standard 6S3P 15,000mAh builds. But remember: with a power of 1200 mW, the module gets very hot, so do not keep the drone on on the ground without airflow for more than 1-2 minutes.
Does this system support built-in recording (DVR)?
Yes, the VTX module has a built-in 32 GB memory. This allows you to record flight video in original quality directly on board the drone. This is your "digital evidence" or portfolio material, unaffected by radio interference.
What improvements have been implemented in the V2 design?
Compared to the first version, the Dual V2 has improved cooling and protection against power surges. The mounting holes are now universal (20x20mm and 25x25mm), making it easy to install this module on your 7-inch and 10-inch "Baby" rigs.
What supply voltage does the Dual V2 support?
The system operates in the 6V - 25.2V range (2S - 6S LiPo). This is perfect for your standard 6S3P 15,000mAh builds. But remember: with a power of 1200 mW, the module gets very hot, so do not keep the drone on on the ground without airflow for more than 1-2 minutes.
Does this system support built-in recording (DVR)?
Yes, the VTX module has a built-in 32 GB memory. This allows you to record flight video in original quality directly on board the drone. This is your "digital evidence" or portfolio material, unaffected by radio interference.
What improvements have been implemented in the V2 design?
Compared to the first version, the Dual V2 has improved cooling and protection against power surges. The mounting holes are now universal (20x20mm and 25x25mm), making it easy to install this module on your 7-inch and 10-inch "Baby" rigs.
What supply voltage does the Dual V2 support?
The system operates in the 6V - 25.2V range (2S - 6S LiPo). This is perfect for your standard 6S3P 15,000mAh builds. But remember: with a power of 1200 mW, the module gets very hot, so do not keep the drone on on the ground without airflow for more than 1-2 minutes.
What improvements have been implemented in the V2 design?
Compared to the first version, the Dual V2 has improved cooling and protection against power surges. The mounting holes are now universal (20x20 mm and 25x25 mm), which makes it easy to install this module on your 7-inch and 10-inch "Baby".
What power voltage does the Dual V2 support?
The system operates in the range of 6V - 25.2V (2S - 6S LiPo). This is perfect for your standard 6S3P 15,000mAh builds. But remember: at 1200mW, the module gets very hot, so don't keep the drone on the ground without airflow for longer than 1-2 minutes.
What improvements have been implemented in the V2 design?
Compared to the first version, the Dual V2 has improved cooling and protection against power surges. The mounting holes are now universal (20x20 mm and 25x25 mm), which makes it easy to install this module on your 7-inch and 10-inch "Baby".
What power voltage does the Dual V2 support?
The system operates in the range of 6V - 25.2V (2S - 6S LiPo). This is perfect for your standard 6S3P 15,000mAh builds. But remember: at 1200mW, the module gets very hot, so don't keep the drone on the ground without airflow for longer than 1-2 minutes.
What supply voltage does the Dual V2 support?
The system operates in the 6V - 25.2V range (2S - 6S LiPo). This is perfect for your standard 6S3P 15,000mAh builds. But remember: with a power of 1200 mW, the module gets very hot, so do not keep the drone on on the ground without airflow for more than 1-2 minutes.
What supply voltage does the Dual V2 support?
The system operates in the 6V - 25.2V range (2S - 6S LiPo). This is perfect for your standard 6S3P 15,000mAh builds. But remember: with a power of 1200 mW, the module gets very hot, so do not keep the drone on on the ground without airflow for more than 1-2 minutes.