|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Walksnail Avatar GT Kit Digital FPV Video System: 2000mW Power for Long-Range Missions
In today's combat, range and video stability are critical factors for success. Walksnail Avatar GT Kit is the most powerful system in the Avatar line, designed for operators working at maximum ranges. With up to 2W (33 dBm) of output power and integrated active cooling, this kit delivers stable 1080p transmission where other systems lose connection due to obstacles or electronic warfare.
The kit is equipped with a premium camera with a Sony Starvis sensor, making it ideal for night reconnaissance and operations in extremely low-light conditions.
Why is the Walksnail Avatar GT Kit a priority for aerial reconnaissance?
The Avatar GT system is designed for harsh operating conditions where regular VTX systems overheat or fail to penetrate noisy airwaves:
- Ultimate Power: Peak power of 33 dBm (2000 mW) allows you to significantly extend the tactical range of the drone and maintain control in areas with a high concentration of radio interference.
- Night vision 0.00001Lux: Thanks to Sony Starvis technology and F1.6 aperture, the camera “sees” in almost complete darkness, ensuring clear target identification without IR illumination.
- Active cooling: A massive radiator and built-in fan prevent power loss (thermal throttling), which is especially important when preparing for takeoff on the ground.
- Full HD recording: The Micro SD card slot supports drives up to 256 GB, allowing you to record each sortie in 1080p quality for analysis of the results of destruction.
Technical and tactical characteristics (TTX) of the Avatar GT Kit
The system parameters ensure full compatibility with modern flight controllers and stable operation from 3S to 6S batteries.
| Parameter | Characteristic value |
|---|---|
| Camera sensor | 1/1,8-inch Sony Starvis (Starlight) |
| Minimum illumination | 0.00001 Lux |
| VTX power (MAX) | Up to 33 dBm (2 W) |
| Resolution | 1080P/100fps; 720P/120fps |
| Video delay | Average 22 ms |
| Input voltage | 11.1 V – 25.2V (3S-6S) |
| SD Memory Capacity | Up to 256GB |
| Mounting Holes | 20x20mm; 25.5 x 25.5 mm |
| System Weight | 41.6 g (including antenna) |
Camera and Stabilization Features
The camera of the Avatar GT kit has an 8 MP lens with a 160° viewing angle, which provides the operator with a wide panorama for orientation:
- Gyroflow Support: Gyro data is recorded along with the video, which allows you to get a perfectly stable image without vibrations after the flight.
- OSD Canvas Mode: Full compatibility with Betaflight, INAV, ArduPilot and other systems for displaying all the necessary telemetry on the goggles screen.
- Compact dimensions Cameras: The 19x19 mm standard allows you to install the camera in any frame (from 5 to 10 inches).
Tactical tip: When operating at maximum power of 2 W, make sure the antennas are securely mounted and not covered by frame elements or the battery to avoid overheating and to ensure maximum range.
Advantages of the GT version for long-range flights
The Walksnail Avatar GT was created in response to the requests of long-range and attack drone operators. The main difference from the V2 or Pro versions is This is the ability to operate for a long time at high power without signal degradation.
- Dual antenna (IPEX-1): Provides better stability of data reception and transmission in dynamics.
- Metal case: In addition to the cooling function, it serves as an additional shield against electromagnetic interference.
- 8 communication channels: Allow a group of drones to operate in one sector without mutual interference.
Package Contents
The system comes with a complete kit for quick installation:
- Walksnail Avatar GT Video System (VTX + Camera)
- 4-pin power cable
- Set of M2 screws (4mm, 5mm, 6mm) and gaskets
- Stickers for labeling SD cards
- Quick Start Guide
Conclusion: Technological dominance in the airwaves
Walksnail Avatar GT Kit is the choice for missions where there is no room for error. The combination of the ultra-sensitive Sony Starvis sensor and a record-breaking 2W power makes this kit the best solution for night reconnaissance and long-range operations. With the Avatar GT, you gain an advantage where others lose contact.
Tactical FAQ: Walksnail Avatar GT Kit Digital System
What is the main feature of the "GT" version?
This is the most powerful and long-range system in the Walksnail line, specially designed for large platforms such as the "Malyuk 10". The main difference is a massive cooling radiator and the ability to operate at extreme powers of up to 2000 mW (2 W). This allows you to confidently "pierce" obstacles and enemy electronic warfare where conventional modules lose signal.
What features does the Walksnail Pro camera in the GT kit include?
You get a top-of-the-line camera with a Sony Starvis II (1/1.8") sensor. As a professional photographer, you'll appreciate its performance in twilight: it captures terrain and vehicle details even in minimal light, maintaining high clarity and low digital noise.
How is cooling implemented at 2W?
The GT module has a built-in aluminum heatsink with a large heat dissipation area. This allows the system to stably operate at maximum power without overheating during long reconnaissance missions. However, remember: on the ground without airflow, the drone should not be left on for longer than 2-3 minutes.
What is the range and signal stability of the GT system?
With two antennas and 2000 mW of power, paired with your Walksnail Avatar Repeater, you can count on stable 1080p digital video at a range of 20+ km. This makes the GT system ideal for deep reconnaissance and strikes beyond standard FPV range.
Does the module support onboard recording and telemetry?
Yes, the Avatar GT has 32GB of onboard memory for clear flight recording (DVR) in 1080p resolution. It also fully supports Canvas Mode (MSP) for outputting full Betaflight telemetry to your Goggle L goggles, allowing you to see the voltage of your 6S4P assemblies in real time.
What are the power features of this powerful module?
The system supports a wide input voltage of 11.1V - 25.2V (3S - 6S). Since the module draws significant current at maximum power, make sure your flight controller or separate BEC on the drone can handle up to 2-3 Amps.