A combined system for 24/7 enemy surveillance. Mounted on a tripod or parapet, it is controlled remotely from a control panel in a protected case. Connection of a customer thermal imager and control of the day module zoom via an encoder are provided.
Video from the day module and thermal imager is transmitted via a single trunk cable, video source switching is possible.
Digital video output to gadgets (tablet/phone) for recording or broadcasting is supported.
The system is completely wired, therefore it does not create radiation in any spectrum.

Technical specifications
Rotation angle:
• horizontal: 360°
• vertical: from -30° to +90°

Dimensions:
• swivel mechanism: 120 × 80 × 140 mm
• protected case (remote control): 460 × 400 × 270 mm (with reel and tripod)

Weight: 9 kg

Tripod height: 1500 mm

Monitor: 16 inches

Power: 12/220 V or FPV battery up to 38 V

Controls:
• rotation - joystick
• zoom - Encoder

Transmission:
Video and control signals — via cable
Camera/thermal imager switching — from remote control
Digital video output (video capture card) — yes

Video recording:not provided

Connection to gadgets: via video capture card
• PAL: 720×576 @ 25 fps
• NTSC: 720×480 @ 30 fps

Interface: aviation connectors, Type-C, XT60

Case protection:
• Rotating mechanism: IP67
Remote control (case): IP65

Materials:
Rotating mechanism: plastic
Remote control: plastic
Optics mount: aluminum
Tripod: Aluminum

Remote charging of the thermal imager: yes

Azimuth indicator: manual setting (without GPS)

Trunk cable (default): 20 m (twisted pair)

Camera specifications:
Objective lens diameter: 30 mm

Optical zoom: 36x;

Sensor: 1/2.7", area >6.8 mm

Focal length: 5.85–93.6 mm

Aperture: f/1.8–f/3.9

Effective range:500-700 m

Power consumption
Standby mode (camera on) — 1185 mA / 14 W

Standby mode (camera + thermal imager charger) — 2042 mA / 24 W

Operation (1 axis + camera + charger) — 2700 mA / 32 W

Work (2 axes + camera + charging) - 3100 mA / 37 W