|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Fiber Optic Connection Station with External Media Converter: 50 km Communication Outside EW Range
In modern combat conditions, where enemy electronic warfare (EW) systems are becoming increasingly sophisticated, traditional UAV radio control channels often prove powerless. Fiber Optic Connection Station with External Media Converter is a professional solution for FPV crews, providing a physical, secure communication channel. Thanks to the use of single-mode fiber, this station allows drone control and video signal reception at a distance of up to 50 kilometers, remaining completely invulnerable to any radio interference.
Key Benefits of the Station with an External Media Converter
Unlike systems with built-in modules, an external media converter provides greater flexibility in equipment configuration and maintenance in the field. This is critical for rapid repair or replacement of components directly on-site.
- Ultimate range: Single mode fiber support allows operation at distances of up to 50 km, which opens up opportunities for deep tactical operations behind enemy lines.
- Complete radio silence: Using fiber optics instead of radio air makes the operator's position invisible to enemy SIGINT (electronic reconnaissance) and direction finders.
- Support for top protocols: The station is fully compatible with CRSF, ELRS and TBS (Crossfire), allowing it to be integrated into any modern control ecosystem.
- Stable video without delays: Transmission of an analog video signal (PAL/NTSC) without digital artifacts and "snow" typical of a radio channel under the influence of electronic warfare.
Technical and tactical characteristics (TTX) of the station
The equipment is designed to operate in a wide range of voltages and supports all modern standards for transmitting digital signals.
| Parameter | Characteristic value |
|---|---|
| Media converter type | External |
| Signal transmission range | Up to 50 km (Single mode fiber) |
| Data protocols | CRSF, ELRS, TBS |
| Signal standards | TTL and S.BUS (digital signals) |
| Data transfer rate | Up to 1 Mbps |
| Video formats | PAL / NTSC |
| Input voltage | 9 - 18 V (support for 3-4S power systems) |
| Wavelength | 1310 nm / 1550 nm |
| Housing material | High-quality aluminum alloy (protection and heat dissipation) |
Interfaces and connectivity
The station is equipped with all the necessary ports for quick integration into a ground control station (NSU) or direct connection to glasses and operator consoles.
- DATA channels: Connection via a specialized GH1.25 connector or a standard RJ.45 network interface.
- VIDEO outputs: Using GH1.25 or classic 2xRCA female ("tulips") to output images to a monitor or video glasses.
- Power supply: A universal 9-18V input allows the use of standard battery assemblies or the vehicle's on-board network.
Complete system kit
We supply the station ready for operation. The kit includes an extended set of cables for connecting any peripherals:
- Main station module;
- AV cable RCA (mini jack): For video signal output;
- RJ.45 - RJ.45 cable: For long-distance data transmission;
- GH1.25 cables (4 pin and 6 pin): For connecting telemetry and control;
- RJ.45 Adapter: For convenient switching of network cables.
Expert opinion: Using an external media converter allows you to move the antenna part or the fiber entry point away from the operator's immediate location, which further increases personnel safety.
Why is Warmax the choice of professionals?
Our equipment is proven in real combat conditions. A station with an external media converter provides unrivaled reliability where other systems fail. The durable aluminum housing protects sensitive electronics from impact, moisture, and overheating, ensuring uninterrupted operation during long outings.
Frequently Asked Questions about External Connection of Communication Modules
Why use an external media converter if you have an internal one?
This is a question of reliability and speed of maintenance. The external module is easy to replace in the field without disassembling the entire station. This is critical if the connector becomes clogged with dirt or fails—replacement takes just seconds.
Will the module be lost during transportation?
The station is equipped with a secure mount or a special compartment for securing the module. It is protected from vibrations during transportation on equipment, but can be easily removed manually without tools.
What power supply does the external unit require?
The external converter is powered directly from the main station via the system cable. You don't need additional batteries or power supplies — the system works as a single unit.
Does the external connection affect signal latency?
The latency remains zero. The speed of light in optics does not depend on whether the converter is inside or outside the housing. Drone control remains extremely responsive.
Can the station be used with different types of fiber?
Yes, the external design makes the system universal. Simply replacing the compact converter unit is enough to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under cover to prevent short circuits.
Expert opinion: Using an external media converter allows you to move the antenna section or fiber entry point away from the operator's immediate location, which further improves personnel safety.
Why is Warmax the choice of professionals?
Our equipment is proven in real combat conditions. A station with an external media converter provides unrivaled reliability where other systems fail. The durable aluminum housing protects sensitive electronics from impacts, moisture, and overheating, ensuring uninterrupted operation during long deployments.
Frequently asked questions about external connection of communication modules
Why do you need an external media converter if you have an internal one?
It's a question of reliability and service speed. The external module is easy to replace in the field without disassembling the entire station. This is critical if the connector is clogged with dirt or faulty — replacement takes just seconds.
Will the module be lost during transportation?
The station is equipped with a secure mount or a special compartment for securing the module. It is protected from vibration during transportation on equipment, but can be easily removed manually without tools.
What power supply is required for the external unit?
The external converter is powered directly from the main station via the system cable. You do not need additional batteries or power supplies — the system operates as a single unit.
Does the external connection affect signal latency?
The latency remains zero. The speed of light in optics does not depend on whether the converter is located inside or outside the housing. Drone control remains extremely responsive.
Can the station be used with different fiber types?
Yes, the external design makes the system universal. You only need to replace the compact converter unit to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under a canopy to prevent short circuits.
Expert opinion: Using an external media converter allows you to move the antenna section or fiber entry point away from the operator's immediate location, which further improves personnel safety.
Why is Warmax the choice of professionals?
Our equipment is proven in real combat conditions. A station with an external media converter provides unrivaled reliability where other systems fail. The durable aluminum housing protects sensitive electronics from impacts, moisture, and overheating, ensuring uninterrupted operation during long deployments.
Frequently asked questions about external connection of communication modules
Why do you need an external media converter if you have an internal one?
It's a question of reliability and service speed. The external module is easy to replace in the field without disassembling the entire station. This is critical if the connector is clogged with dirt or faulty — replacement takes just seconds.
Will the module be lost during transportation?
The station is equipped with a secure mount or a special compartment for securing the module. It is protected from vibration during transportation on equipment, but can be easily removed manually without tools.
What power supply is required for the external unit?
The external converter is powered directly from the main station via the system cable. You do not need additional batteries or power supplies — the system operates as a single unit.
Does the external connection affect signal latency?
The latency remains zero. The speed of light in optics does not depend on whether the converter is located inside or outside the housing. Drone control remains extremely responsive.
Can the station be used with different fiber types?
Yes, the external design makes the system universal. You only need to replace the compact converter unit to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under a canopy to prevent short circuits.
Expert opinion: Using an external media converter allows you to move the antenna section or fiber entry point away from the operator's immediate location, which further improves personnel safety.
Why is Warmax the choice of professionals?
Our equipment has been tested in real combat conditions. A station with an external media converter provides unrivaled reliability where other systems fail. A durable aluminum housing protects sensitive electronics from impacts, moisture, and overheating, ensuring uninterrupted operation during long deployments.
Frequently asked questions about external connection of communication modules
Why use an external media converter if you have an internal one?
This is a question of reliability and speed of maintenance. The external module can be easily replaced in the field without disassembling the entire station. This is critical if the connector is clogged with dirt or faulty — replacement takes just seconds.
Will the module be lost during transportation?
The station is equipped with a reliable mount or a special compartment for fixing the module. It is protected from vibrations during transportation on equipment, but can be easily removed manually without tools.
What power supply is required for the external unit?
The external converter is powered directly from the main station via the system cable. You do not need additional batteries or power supplies — the system works as a single unit.
Does the external connection affect the signal delay?
The delay remains zero. The speed of light in optics does not depend on whether the converter is inside the housing or outside. Drone control remains extremely responsive.
Can the station be used with different fiber types?
Yes, the external design makes the system universal. Simply replace the compact converter block to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under a canopy to prevent short circuits.
Expert opinion: Using an external media converter allows you to move the antenna section or fiber entry point away from the operator's immediate location, which further improves personnel safety.
Why is Warmax the choice of professionals?
Our equipment has been tested in real combat conditions. A station with an external media converter provides unrivaled reliability where other systems fail. A durable aluminum housing protects sensitive electronics from impacts, moisture, and overheating, ensuring uninterrupted operation during long deployments.
Frequently asked questions about external connection of communication modules
Why use an external media converter if you have an internal one?
This is a question of reliability and speed of maintenance. The external module can be easily replaced in the field without disassembling the entire station. This is critical if the connector is clogged with dirt or faulty — replacement takes just seconds.
Will the module be lost during transportation?
The station is equipped with a reliable mount or a special compartment for fixing the module. It is protected from vibrations during transportation on equipment, but can be easily removed manually without tools.
What power supply is required for the external unit?
The external converter is powered directly from the main station via the system cable. You do not need additional batteries or power supplies — the system works as a single unit.
Does the external connection affect the signal delay?
The delay remains zero. The speed of light in optics does not depend on whether the converter is inside the housing or outside. Drone control remains extremely responsive.
Can the station be used with different fiber types?
Yes, the external design makes the system universal. Simply replace the compact converter block to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under a canopy to prevent short circuits.
Why is Warmax the choice of professionals?
Our equipment is proven in real combat conditions. A station with an external media converter provides unrivaled reliability where other systems fail. A durable aluminum housing protects sensitive electronics from impacts, moisture, and overheating, ensuring uninterrupted operation during long deployments.
Frequently asked questions about external connection of communication modules
Why use an external media converter if there is an internal one?
This is a question of reliability and speed of maintenance. The external module can be easily replaced in the field without disassembling the entire station. This is critical if the connector is clogged with dirt or fails — Replacement takes just seconds.
Will the module get lost during transportation?
The station is equipped with a reliable mount or a special compartment for fixing the module. It is protected from vibrations during transportation on equipment, but at the same time can be easily removed manually without using tools.
What power supply is needed for the external unit?
The external converter is powered directly from the main station via the system cable. You do not need additional batteries or power supplies - the system works as a single unit.
Does the external connection affect the signal delay?
The delay remains zero. The speed of light in optics does not depend on whether the converter is inside the housing or outside. Drone control remains extremely responsive.
Can the station be used with different fiber types?
Yes, the external design makes the system universal. Simply replace the compact converter block to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under a canopy to prevent short circuits.
Why is Warmax the choice of professionals?
Our equipment is proven in real combat conditions. A station with an external media converter provides unrivaled reliability where other systems fail. A durable aluminum housing protects sensitive electronics from impacts, moisture, and overheating, ensuring uninterrupted operation during long deployments.
Frequently asked questions about external connection of communication modules
Why use an external media converter if there is an internal one?
This is a question of reliability and speed of maintenance. The external module can be easily replaced in the field without disassembling the entire station. This is critical if the connector is clogged with dirt or fails — Replacement takes just seconds.
Will the module get lost during transportation?
The station is equipped with a reliable mount or a special compartment for fixing the module. It is protected from vibrations during transportation on equipment, but at the same time can be easily removed manually without using tools.
What power supply is needed for the external unit?
The external converter is powered directly from the main station via the system cable. You do not need additional batteries or power supplies - the system works as a single unit.
Does the external connection affect the signal delay?
The delay remains zero. The speed of light in optics does not depend on whether the converter is inside the housing or outside. Drone control remains extremely responsive.
Can the station be used with different fiber types?
Yes, the external design makes the system universal. Simply replace the compact converter block to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under a canopy to prevent short circuits.
Frequently Asked Questions about External Connection of Communication Modules
Why use an external media converter if you have an internal one?
It's a matter of reliability and speed of maintenance. The external module can be easily replaced in the field without disassembling the entire station. This is critical if the connector becomes clogged with dirt or fails—replacement takes just seconds.
Will the module be lost during transportation?
The station is equipped with a secure mount or a special compartment for securing the module. It is protected from vibrations during transportation on equipment, but can be easily removed manually without tools.
What power supply does the external unit require?
The external converter is powered directly from the main station via the system cable. You don't need additional batteries or power supplies — the system works as a single unit.
Does the external connection affect signal latency?
The latency remains zero. The speed of light in optics does not depend on whether the converter is inside or outside the housing. Drone control remains extremely responsive.
Can the station be used with different types of fiber?
Yes, the external design makes the system universal. Simply replacing the compact converter unit is enough to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under cover to prevent short circuits.
Frequently Asked Questions about External Connection of Communication Modules
Why use an external media converter if you have an internal one?
It's a matter of reliability and speed of maintenance. The external module can be easily replaced in the field without disassembling the entire station. This is critical if the connector becomes clogged with dirt or fails—replacement takes just seconds.
Will the module be lost during transportation?
The station is equipped with a secure mount or a special compartment for securing the module. It is protected from vibrations during transportation on equipment, but can be easily removed manually without tools.
What power supply does the external unit require?
The external converter is powered directly from the main station via the system cable. You don't need additional batteries or power supplies — the system works as a single unit.
Does the external connection affect signal latency?
The latency remains zero. The speed of light in optics does not depend on whether the converter is inside or outside the housing. Drone control remains extremely responsive.
Can the station be used with different types of fiber?
Yes, the external design makes the system universal. Simply replacing the compact converter unit is enough to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under cover to prevent short circuits.
Will the module be lost during transportation?
The station is equipped with a reliable mount or a special compartment for fixing the module. It is protected from vibrations during transportation on equipment, but can be easily removed manually without tools.
What power supply is required for the external unit?
The external converter is powered directly from the main station via the system cable. You do not need additional batteries or power supplies — the system works as a single unit.
Does the external connection affect the signal delay?
The delay remains zero. The speed of light in optics does not depend on whether the converter is inside the housing or outside. Drone control remains extremely responsive.
Can the station be used with different fiber types?
Yes, the external design makes the system universal. Simply replace the compact converter block to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under a canopy to prevent short circuits.
Will the module be lost during transportation?
The station is equipped with a reliable mount or a special compartment for fixing the module. It is protected from vibrations during transportation on equipment, but can be easily removed manually without tools.
What power supply is required for the external unit?
The external converter is powered directly from the main station via the system cable. You do not need additional batteries or power supplies — the system works as a single unit.
Does the external connection affect the signal delay?
The delay remains zero. The speed of light in optics does not depend on whether the converter is inside the housing or outside. Drone control remains extremely responsive.
Can the station be used with different fiber types?
Yes, the external design makes the system universal. Simply replace the compact converter block to adapt the station to a new cable type or other technical communication standards.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under a canopy to prevent short circuits.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under cover to prevent short circuits.
How protected is the external module from rain?
The modules are splash-proof, but the connectors are sensitive to moisture. In heavy rain, it is recommended to use protective covers or place the station under cover to prevent short circuits.