|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
EW System for UAV Detection and Countermeasures (Vehicle-Mounted Box)
Comprehensive Countermeasure System for Drones, FPV and Mavic
Designed to detect, identify and suppress unmanned aerial vehicles (UAVs), including FPV drones and DJI Mavic-type UAVs.
The system analyzes a wide radio-frequency spectrum and identifies UAV signals.
The system is designed as a vehicle-mounted box installed on the roof of a vehicle without attracting unnecessary attention. This form factor allows the system to be used in civilian environments while maintaining its functionality.
Application
Passenger cars
Advantages
01. Automatic operation without human involvement (AI)
Detection, analysis and counteraction against UAVs. The system automatically scans the radio-frequency spectrum, identifies a UAV threat and returns to standby mode.
02. Rapid deployment — up to 25 seconds to full readiness
The system immediately switches to operational mode for immediate use. This allows for a rapid response even in critical situations.
03. Digital modulation jammer
The device blocks the drone control signal, causing it to switch to FailSafe mode, which may result in landing or loss of control.
Key Specifications
- UAV detection range — up to 3 km
- Scanning frequency range — 100–7200 MHz
- Integrated ESM + EW system
- FPV drone video interception
- Power — up to 1000 W
- Automatic detection and suppression
- Operating time — up to 2 hours
- IP54-rated sealed enclosure
Technical Specifications
| Detection frequency ranges | 100–7200 MHz |
| UAV detection range | from 3000 m |
| Jamming frequency ranges | 300–1020 / 2100–2800 / 5100–5900 MHz |
| UAV jamming range | from 100 m |
| Signal type | analog video (with scrambler) |
| SDR receiver type | 8-bit I/Q samples |
| Neural network type | convolutional neural network |
| Scanning time | up to 5 sec per 1 GHz |
| Ready time after power-on | up to 20 seconds |
| Antenna type | biconical wideband 360° |
| Control type | automatic / remote controller |
| Power interface | XT60 |
| Power supply range | 9–32 V |
| Power consumption | up to 20 W |
| EW system power | up to 3000 W |
| Total EW output power | up to 600 W |
| Cooling type | active |
| Operating time | up to 2 hours |
| Operating temperature | −20...+50 °C |
| System dimensions | 175 × 85 × 44 cm |
| Weight | approximately 40 kg |
Package Contents
- Vehicle-mounted box
- Electronic protection device (NATO 5865-61-018-9054)
- EW device
- Set of connection cables
- Passport, user manual, copy of certificate of conformity
- Battery, charger