|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
V5 Initiation Board: Maximum Reliability and Safety for Tactical Missions
In today's high-tech warfare, every piece of equipment must function flawlessly. The V5 Initiation Board is a critical component for special-purpose systems and kamikaze FPV drones. The fifth generation of the device features an improved operator protection system and an optimized power system, guaranteeing activation under any circumstances.
The top priority in the development of the V5 version was a multi-level safety system that eliminates premature detonation and provides complete control over the initiation process.
Key Benefits and Features of the V5 Board
The V5 Initiation Board was developed based on real-world combat experience. It combines compactness, energy independence and intelligent timing management.
- Two-minute safety timer: After power is applied, the board enters standby mode for 120 seconds. This gives the operator the necessary time to safely deploy and move away from the device.
- Built-in LiSOCl2 power supply: The use of lithium-thionyl chloride cells ensures a stable voltage even after long-term storage and at extremely low temperatures.
- Self-destruction function: A built-in 45-minute timer guarantees initiation after a set time, which prevents the working equipment from falling into enemy hands.
- Powerful output pulse: A current of 1 A at a voltage of up to 15 V guarantees stable operation of standard initiation means.
Technical and tactical characteristics (TTX)
Below are the main parameters of the V5 board, which make it a leader in its class in reliability and stability of operation.
| Parameter | Characteristic value |
|---|---|
| Model | Initiation Board V5 |
| Arming Delay | 2 minutes (120 seconds) |
| Output voltage | 13 - 15 V |
| Output current | 1 A |
| Built-in power supply type | LiSOCl2 (Lithium Thionyl Chloride) |
| Self-destruction time (Timer Mode) | 45 minutes |
| Temperature range | from -40°C to +60°C |
Safety system and operating logic
The V5 initiation board operates according to a clear algorithm that minimizes the human factor and technical failures:
- Activation stage: After connecting the power, the system performs self-diagnostics of the circuits.
- "Safe" mode: The output contacts remain blocked for 2 minutes, which allows you to safely fix the device.
- Combat mode: After the safety timer expires, the board is ready for initiation by an external signal or by a timer.
- Automatic initiation: If no external signal is received after 45 minutes, the board automatically sends a pulse to the output.
Important note: The use of LiSOCl2 batteries allows the board to remain in standby mode for months without losing charge, which is critical for "bugs" and hidden systems.
Why choose the V5 version?
Unlike cheaper analogs or homemade circuits, the V5 initiation board offers:
- Guaranteed current: 1A is enough for initiation even with significant length of wires.
- Compact form factor: Easily integrated into the limited space of cases UAV.
- Component reliability: Industrial Grade components are used.
Conclusion: Uncompromising Reliability
The V5 Initiation Board is the choice of professionals for whom operator safety and guaranteed mission execution are top priorities. With a built-in autonomous power supply and clear safety timers, it provides a technological advantage in the most challenging application scenarios.
Tactical FAQ: The Next Generation V5 Initiation System
1. The main advantage of the V5 over older versions?
Multi-layered protection and digital arming protocol. The board will not fire until it receives a "friend or foe" command from the flight controller. It's your personal "antivirus" against accidental detonations.
2. Remote control and "safe reset"?
Control via PWM channel from the Radiomaster remote control. If the drone falls before reaching its target, it can be deactivated remotely (Safe Reset). It's like a fuse that can be turned back on when the situation gets out of control.
3. Electrical parameters and operation with EDP?
The board produces a powerful pulse for reliable detonation of the capsule. Power supply 5-25 V allows it to be connected directly to a 6S assembly. Your EcoFlow Delta 2 in the rear will help check the readiness of all initiation circuits before takeoff.
4. Visual control of the board status (RGB)?
Three colors - three states. Green (safe), Yellow (preparation), Red (combat mode). As a photographer, you will quickly get used to this "color correction" of the status. Red means "attention, the shutter is cocked".
5. Protection from electronic warfare and false alarms?
Galvanic isolation filters out all interference from powerful transmitters. The board is "deaf" to electronic warfare interference and responds only to the controller logic. This is your guarantee that the "surgical intervention" will go exactly as planned.
6. Installation and dimensions?
The compact board easily hides in the frame. Reinforced soldering pads are resistant to overload.
Tactical FAQ: V5 Next Generation Initiation System
1. What is the main advantage of the V5 over older versions?
Multi-level protection and digital arming protocol. The board will not fire until it receives a "friend or foe" command from the flight controller. This is your personal "antivirus" against accidental detonations.
2. Remote control and "safe reset"?
Control via PWM channel from the Radiomaster remote control. If the drone crashes before reaching its destination, it can be deactivated remotely (Safe Reset). It's like a fuse that can be flipped back on when the situation gets out of control.
3. Electrical parameters and operation with the EDP?
The board produces a powerful pulse for reliable detonation of the capsule. Power supply 5-25 V allows it to be connected directly to a 6S assembly. Your EcoFlow Delta 2 in the rear will help check the readiness of all initiation circuits before takeoff.
4. Visual control of board status (RGB)?
Three colors - three states. Green (safe), Yellow (preparation), Red (combat mode). As a photographer, you'll quickly get used to this "color correction" status. Red means "attention, shutter cocked."
5. Protection from electronic warfare and false alarms?
Galvanic isolation filters out all interference from powerful transmitters. The board is "deaf" to electronic warfare interference and responds only to the controller logic. This is your guarantee that the "surgical intervention" will go exactly according to plan.
6. Mounting and dimensions?
The compact board easily hides in the frame. Reinforced soldering pads are resistant to overload.
Tactical FAQ: V5 Next Generation Initiation System
1. What is the main advantage of the V5 over older versions?
Multi-level protection and digital arming protocol. The board will not fire until it receives a "friend or foe" command from the flight controller. This is your personal "antivirus" against accidental detonations.
2. Remote control and "safe reset"?
Control via PWM channel from the Radiomaster remote control. If the drone crashes before reaching its destination, it can be deactivated remotely (Safe Reset). It's like a fuse that can be flipped back on when the situation gets out of control.
3. Electrical parameters and operation with the EDP?
The board produces a powerful pulse for reliable detonation of the capsule. Power supply 5-25 V allows it to be connected directly to a 6S assembly. Your EcoFlow Delta 2 in the rear will help check the readiness of all initiation circuits before takeoff.
4. Visual control of board status (RGB)?
Three colors - three states. Green (safe), Yellow (preparation), Red (combat mode). As a photographer, you'll quickly get used to this "color correction" status. Red means "attention, shutter cocked."
5. Protection from electronic warfare and false alarms?
Galvanic isolation filters out all interference from powerful transmitters. The board is "deaf" to electronic warfare interference and responds only to the controller logic. This is your guarantee that the "surgical intervention" will go exactly according to plan.
6. Mounting and dimensions?
The compact board easily hides in the frame. Reinforced soldering pads are resistant to overload.
Multi-level protection and digital arming protocol. The board will not fire until it receives a "friend or foe" command from the flight controller. This is your personal "antivirus" against accidental detonations.
2. Remote control and "safe reset"?
Control via PWM channel from the Radiomaster remote control. If the drone falls before reaching its destination, it can be deactivated remotely (Safe Reset). It's like a fuse that can be turned back on when the situation gets out of control.
3. Electrical Parameters and Operation with the EDP?
The board produces a powerful pulse for reliable primer detonation. 5-25V power supply allows it to be connected directly to a 6S assembly. Your EcoFlow Delta 2 in the rear will help check the readiness of all initiation circuits before takeoff.
4. Visual Monitoring of Board Status (RGB)?
Three colors — three states. Green (safe), Yellow (preparation), Red (combat mode). As a photographer, you will quickly get used to this “color correction” of the status. Red — means “attention, the shutter is cocked.”
5. Protection against electronic warfare and false alarms?
Galvanic isolation filters out all interference from powerful transmitters. The board is immune to electronic warfare interference and responds only to the controller logic. This is your guarantee that the "surgical intervention" will proceed strictly according to plan.
6. Installation and dimensions?
The compact board easily hides in the frame. Reinforced soldering pads are resistant to overloads.
Multi-level protection and digital arming protocol. The board will not fire until it receives a "friend or foe" command from the flight controller. This is your personal "antivirus" against accidental detonations.
2. Remote control and "safe reset"?
Control via PWM channel from the Radiomaster remote control. If the drone falls before reaching its destination, it can be deactivated remotely (Safe Reset). It's like a fuse that can be turned back on when the situation gets out of control.
3. Electrical Parameters and Operation with the EDP?
The board produces a powerful pulse for reliable primer detonation. 5-25V power supply allows it to be connected directly to a 6S assembly. Your EcoFlow Delta 2 in the rear will help check the readiness of all initiation circuits before takeoff.
4. Visual Monitoring of Board Status (RGB)?
Three colors — three states. Green (safe), Yellow (preparation), Red (combat mode). As a photographer, you will quickly get used to this “color correction” of the status. Red — means “attention, the shutter is cocked.”
5. Protection against electronic warfare and false alarms?
Galvanic isolation filters out all interference from powerful transmitters. The board is immune to electronic warfare interference and responds only to the controller logic. This is your guarantee that the "surgical intervention" will proceed strictly according to plan.
6. Installation and dimensions?
The compact board easily hides in the frame. Reinforced soldering pads are resistant to overloads.
The board produces a powerful pulse for reliable primer detonation. 5-25V power supply allows it to be connected directly to a 6S assembly. Your EcoFlow Delta 2 in the rear will help check the readiness of all initiation circuits before takeoff.
4. Visual Monitoring of Board Status (RGB)?
Three colors — three states. Green (safe), Yellow (preparation), Red (combat mode). As a photographer, you will quickly get used to this “color correction” of the status. Red — means “attention, the shutter is cocked.”
5. Protection against electronic warfare and false alarms?
Galvanic isolation filters out all interference from powerful transmitters. The board is immune to electronic warfare interference and responds only to the controller logic. This is your guarantee that the "surgical intervention" will proceed strictly according to plan.
6. Installation and dimensions?
The compact board easily hides in the frame. Reinforced soldering pads are resistant to overloads.
The board produces a powerful pulse for reliable primer detonation. 5-25V power supply allows it to be connected directly to a 6S assembly. Your EcoFlow Delta 2 in the rear will help check the readiness of all initiation circuits before takeoff.
4. Visual Monitoring of Board Status (RGB)?
Three colors — three states. Green (safe), Yellow (preparation), Red (combat mode). As a photographer, you will quickly get used to this “color correction” of the status. Red — means “attention, the shutter is cocked.”
5. Protection against electronic warfare and false alarms?
Galvanic isolation filters out all interference from powerful transmitters. The board is immune to electronic warfare interference and responds only to the controller logic. This is your guarantee that the "surgical intervention" will proceed strictly according to plan.
6. Installation and dimensions?
The compact board easily hides in the frame. Reinforced soldering pads are resistant to overloads.