|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
ELEGOO PETG Filament 1.75mm (1kg), Black: Wear-resistant plastic for tactical tasks
In frontline conditions, the reliability of each printed part can be very expensive. ELEGOO PETG plastic in tactical black is the choice of engineers who need a balance between ease of printing and the physical durability of the finished product. Unlike standard PLA, PETG has increased impact strength and chemical resistance, which makes it indispensable for the production of UAV components, equipment elements and repair kits in the field.
Why Elegoo PETG is the standard for "field" 3D printing?
PETG (polyethylene terephthalate glycol) combines the best qualities: ease of use (like PLA) and mechanical strength (close to ABS). However, unlike ABS, it does not shrink as much, which allows you to print large parts even on printers without a closed chamber (for example, on the Creality Ender series or Elegoo Neptune).
- UV resistance: Parts do not become brittle when exposed to sunlight for a long time, which is critical for UAV bodies.
- Moisture resistance: The material does not deteriorate under the influence of rain or high humidity, maintaining the geometry of the product.
- Low shrinkage: Guarantees dimensional accuracy, which is important for connecting nodes, antenna mounts and threaded connections.
- Tactical black color: Deep black matte (under certain settings) helps in camouflaging equipment.
Technical characteristics (TTX) of filament
Plastic ELEGOO features consistent diameter across the entire spool length, minimizing the risk of nozzle clogging or underextrusion during long print runs.
| Parameter | Value |
|---|---|
| Material Type | PETG (Polyethylene Terephthalate Glycol) |
| Manufacturer | ELEGOO |
| Thread diameter | 1.75 mm |
| Net Weight | 1 kg |
| Color | Black |
| Extruder Temperature | 230-250 °C |
| Bed Temperature | 70-90 °C |
| Compatibility | Most FDM printers (Creality, Anycubic, Bambu Lab, etc.) |
Military Engineering Applications
Due to its viscosity, PETG does not shatter into sharp fragments when mechanically destroyed, making it safer and more reliable for tactical equipment:
- UAVs and NRCs: Drop system housings, tails, mounts for cameras and remote antennas.
- Equipment: Buckles, clamps, guides for communication wires, brackets for night vision devices (NVDs).
- Medical: Ampoule cases, tourniquet clamps (provided that they are filled correctly), and organizers for medications.
- Tools: Handles, protective caps, and adapters for special equipment.
Printing Tips for Maximum Durability
To ensure your parts can withstand combat loads, we recommend following these guidelines:
- Infill: For heavy-duty components, use at least 40-60% infill (like "Gyroid").
- Cooling: For better layer adhesion (tensile strength), minimize airflow (to 20-30% or turn it off completely on critical parts).
- Adhesion: PETG adheres well to PEI plates at a bed temperature of 80 °C.
Expert Advice: PETG ELEGOO is supplied vacuum-packed with a desiccant. To avoid "webbing" and fragility, store the spool in a dry place or dry it before printing critical components.
Conclusion
ELEGOO 1.75mm PETG plastic is a "workhorse" for volunteer centers and engineering units. Its black color, high impact strength, and weather resistance make it an ideal material for creating reliable products.which should work under real-world conditions.
Frequently Asked Questions about Creality PLA (Black) Plastic
Is this plastic only suitable for Creality brand printers?
No, it is an absolutely universal material. It is compatible with any 3D printer that uses 1.75 mm filament (Anycubic, Bambu Lab, Prusa, etc.). The main thing is Make sure your extruder is set to this diameter.
What temperatures provide the best print quality?
The following parameters are recommended for standard PLA from Creality:
- Nozzle temperature: 190-220°C.
- Bed temperature: 0-60°C.
Thanks to minimal shrinkage, PLA can be printed even on a cold bed, but heating it to 50-60°C ensures perfect adhesion of the first layer.
How stable is the filament diameter along the entire length of the spool?
Creality maintains high standards with with a deviation tolerance of no more than $\pm 0.03$ mm. This is critical for uniform feed: the nozzle will not clog, and voids will not appear in the parts due to thin sections of the filament.
What does the finished model look like - is it matte or glossy?
This plastic produces a deep black color with a satin (semi-gloss) sheen. Life hack: for a more matte finish, try slightly lowering the print temperature and increasing the airflow.
Is it safe to print with this plastic in a living room?
Yes, PLA is one of the most environmentally friendly materials. It is made from biodegradable resources (corn starch). When heated, it does not emit toxic fumes; only a slight sweet popcorn aroma is noticeable.
How to properly store the spool to prevent the plastic from deteriorating?
PLA is hygroscopic and absorbs moisture. If you plan to take a break from printing, put the spool in a ziplock bag with silica gel. If the plastic becomes damp (clicking sounds are heard when printing), it should be dried for 3-4 hours at a temperature of 45-50°C.