|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
In modern combat operations, the range and stability of the UAV control channel are decisive factors for mission success. The 17 dBi Passive Directional Yagi Antenna is a professional tool designed for operation in the 915 MHz band. It allows FPV drone pilots to significantly extend the signal range and ensure confident control even in conditions of active enemy electronic countermeasures.
With a narrow beamforming pattern and high gain, this antenna "pushes through" Electronic warfare interference by focusing all transmitter energy in a clearly defined direction.
Why is the 915 MHz band and 17 dBi gain critical?
The 915 MHz frequency (used in the ELRS and Crossfire protocols) has significantly better obstacle avoidance and lower atmospheric attenuation compared to 2.4 GHz. Using a 10-element Yagi antenna allows this band to fully realize its potential.
- Ultimate range: 17 dBi gain allows operation at distances inaccessible to standard whip antennas. or panel antennas.
- Narrow communication beam: The beam width (45° horizontally and 35° vertically) ensures a high concentration of energy, which significantly complicates the direction finding of the operator's position by enemy ELINT systems.
- Passive reliability: The antenna does not require additional power, which simplifies logistics and increases the fault tolerance of the system in the field.
- Minimum SWR: Professional tuning ensures efficient operation of the transmitter without overheating and power loss.
Technical and tactical characteristics (TTX)
The antenna design is optimized for quick deployment and resistance to wind loads due to the verified dimensions and materials.
| Parameter | Characteristic value |
|---|---|
| Antenna type | Passive,Directional (Yagi) |
| Operating Frequency Range | 915 MHz |
| Gain | 17 dBi |
| Number of Elements | 10-Element Design |
| Polarization | Linear (horizontal or vertical) |
| Connector Type | SMA Plug (male output) |
| Beam Width (Horizontal -3 dB) | 45° |
| Beamwidth (Vertical -3 dB) | 35° |
| Dimensions | 1000 x 170 x 100 mm |
Combat Performance Benefits
The 17 dBi Yagi Antenna is designed for static positions or mast mounting. Its 1 meter length ensures high signal selectivity, which is critical when operating in areas of dense electronic noise.
- Breakthrough of defensive electronic warfare: Thanks to the high gain, the control signal is able to "pass" through enemy dome defense systems as it approaches the target.
- Connection versatility: The SMA Plug connector allows you to connect the antenna directly to most modern modules (TBS Crossfire, ELRS) or use extension cables to move the antenna to a safe distance.
- Polarization flexibility: Depending on the orientation of the elements (vertical or horizontal), the operator can adapt the system to specific radio wave propagation conditions and the polarization of the antenna on the drone.
Expert advice: To achieve maximum results at distances of 20+ km, it is recommended to install the antenna on a mast with a height of 3-5 meters. This allows the Fresnel zone to be raised above terrain obstacles and vegetation.
Compatibility and Application
The antenna is an ideal solution for:
- Ground Control Stations (GCS) for long-range reconnaissance missions.
- FPV strike teams operating against enemy rear targets.
- Remote communication repeaters.
Conclusion: The pilot's technological advantage.
The 17 dBi passive Yagi antenna is the choice of professionals who are not accustomed to compromising on communication reliability. High manufacturing precision, stable characteristics, and powerful gain provide that very superiority in the sky that turns a difficult mission into a successful outcome.
Tactical FAQ: Six questions about the super-directional Yagi antenna.
1. What does 17 dBi mean for flight range?
That's a very high gain. Imagine the difference between a regular flashlight and a laser. 17 dBi focuses the energy into a narrow beam, which increases the control range by 3-4 times. This is a tool for deep reconnaissance behind enemy lines.
2. What is the main difficulty of working with such a powerful antenna?
Narrow radiation sector ($15^\circ-20^\circ$). As a photographer, you know how difficult it is to capture an object with a 600 mm lens — the same is here: if the drone leaves the sector, the connection will be lost instantly. The antenna requires surgical precision pointing.
3. Why use a passive antenna if there are active boosters?
Radio silence: It does not make noise on the air, which interferes with enemy radio intelligence (SIGINT).
Reliability: There are no electronics that can burn out.
Signal purity: It does not introduce distortion, which is often found in cheap active amplifiers.
4. How to correctly orient the antenna by polarization?
Critical point: if the antenna on the drone is vertical, then the Yagi elements must also be vertical. An error of $90^\circ$ will lead to a loss of up to $20\text{ dB}$ signal - it's like trying to shoot with the lens cap closed.
5. Will the operation of the Yagi interfere with your Starlink or ASUS TUF laptop?
Starlink: Completely safe, frequencies do not overlap.
Wi-Fi: If the Yagi is at 2.4 GHz, it can clog the laptop's Wi-Fi. It is better to connect the ASUS TUF to Starlink via a LAN cable for a stable study experience.
6. How to organize the operator's safe work?
The best tactic is to extend the antenna to the mast with an RG-8 or WL-400 cable for 10-20 meters. This will allow you to remain in shelter while the antenna is operating at altitude. It is passive, so the EcoFlow resource remains for the laptop and communication.