|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
2.8m Metal Tripod for Remote Antennas: Maximum Radio Horizon for UAVs and Communications
In modern combat conditions, signal stability directly depends on the antenna installation height. A metal tripod with 3-point support is a professional solution for quickly elevating remote antennas, repeaters, and monitoring systems to a height of up to 2.8 meters. This elevation level allows you to significantly expand the radio horizon, overcome obstacles such as tall vegetation or buildings, and ensure stable "line of sight" between the operator and the drone.
Why is a height of 280 cm a critical advantage on the battlefield?
Most standard tripods are limited to a height of 1.5-1.8 m, which is often insufficient for working in wooded areas or among destroyed buildings. The model with an operating range of 95-280 cm allows the antenna to be placed above most obstacles, which is critical for:
- UAV crews: Improving video signal reception and control stability over long distances.
- Communications units: Placing repeaters to provide coverage in lowlands and ravines.
- Electronic warfare/SIGINT systems: Raising sensors for more effective airwaves scanning and enemy signal suppression.
Technical characteristics (TTX) of the high tripod
The design is designed for intensive use. The use of metal as the main material ensures the inertia of the tripod — It is less susceptible to swaying in the wind, which is critical for directional antennas.
| Parameter | Value |
|---|---|
| Material | Reinforced metal |
| Working height | From 95 cm to 280 cm |
| Maximum load | Up to 5 kg (active equipment,antennas) |
| Length when assembled | 100 cm |
| Universal interfaces | 1/4 and 3/8 inch threads |
| Latch type | Screw lock (secure locking) |
| Supports | 3-point system with anti-slip feet |
Connection versatility: 1/4 and 3/8 interfaces
The tripod is equipped with the most common mounting standards - 1/4" and 3/8". This allows for the installation of a wide range of tactical equipment without the need for additional adapters: from lightweight dipole antennas to complex antenna systems and repeaters weighing up to 5 kg.
Structural reliability for field conditions
- Screw locks: Unlike plastic latches, screw mechanisms operate reliably when exposed to dirt, sand, or icy conditions. They ensure that the section does not collapse under the weight of the equipment.
- Stable tripod: The wide base of the 3-point support provides stability on uneven surfaces.
- Anti-slip feet: Special rubber tips allow you to fix the tripod on wet ground, asphalt or metal surfaces (for example, on the roof of a car).
- Mobility: Despite its considerable height, the tripod is only 100 cm long when folded, which makes it easy to place it in the troop compartment or trunk of a pickup truck.
Tactical tip: When installed at the maximum height (2.8 m) in strong wind conditions, it is recommended to additionally weigh down the tripod legs with sandbags or stones — The metal structure and screw locks can easily withstand such stabilization.
Applications
- Communications: Installation of remote antennas for radios and satellite terminals.
- Aerial reconnaissance: Relocation of video signal receiving antennas outside the shadow zone of a dugout or vehicle body.
- Meteorology and surveillance: Installation of weather sensors or remote video surveillance systems.
Conclusion
Metal tripod 2.8 m is a reliable tool for specialists who need maximum height while maintaining mobility. Its versatility, metal strength, and support for popular interfaces (1/4, 3/8) make it a basic element of the communications kit of any modern unit. Raising the antenna almost 3 meters allows the signal to pass over the roofs of cars, tents, and people's heads. This is critical for communication stability, as it reduces signal attenuation from ground obstacles and extends the line of sight. The wide leg spread gives the tripod a low center of gravity. However, at a height of 2.8 m, the antenna's windage increases. For safe use in windy conditions, it is recommended to hang a load on the center pole or place sandbags on the tripod feet. Yes, the metal structure is rated for a vertical load of up to 5-8 kg. This allows you to attach not only a lightweight dipole, but also a powerful directional antenna or an active UAV repeater unit to the top. Most tripods have a universal mount — a standard 16 mm studio spigot with a 1/4" or 3/8" thread. This allows you to screw on antennas directly or use adapters for antenna masts. The tripod has a telescopic design. Each section is secured with a reliable screw clamp. You can set any intermediate height (for example, 1.5 m or 2.1 m) depending on the terrain and camouflage tasks. When folded, the tripod is compact - its length is about 90-95 cm, and the weight does not exceed 2.5-3.5 kg. It easily fits into a standard case,which is convenient for carrying on the shoulder or transporting in any transport.Frequently Asked Questions about the Heavy-Duty Antenna Tripod (280 cm)
Why is a height of 280 cm important for remote antennas?
How stable is the 3-point support when fully extended?
Can heavy antennas or amplifiers be mounted on this tripod?
What types of mounts does this tripod support?
How easy is it to adjust the height in the field?
"Question", "name": "How much weight can the structure support?", "acceptedAnswer": { "@type": "Answer", "text": "The tripod can support loads of up to 5-8 kg, which is suitable for heavy directional antennas and repeaters." } }] } "Question", "name": "How much weight can the structure support?", "acceptedAnswer": { "@type": "Answer", "text": "The tripod can support loads of up to 5-8 kg, which is suitable for heavy directional antennas and repeaters." } }] } What are the dimensions of the device when folded?