|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Kit: Berkut SkyRage 10W Remote Antenna + 20m RG-8 Cable - Ultimate Signal Boost
In today's aerial reconnaissance and strike missions, communication channel stability and flight range are critical success factors. Berkut SkyRage 10W Kit with 20m RG-8 Coaxial Cable - This is a professional solution for UAV operators, allowing to radically increase the range of the drone and ensure resistance to electronic warfare (EW).
By combining a powerful tri-band amplifier and high-quality low-attenuation cable, this kit allows the pilot to operate from deep cover while maintaining maximum output power on the emitters.
Key advantages of the Berkut SkyRage 10W kit
This kit is designed specifically for difficult combat conditions, where standard communication equipment is powerless against enemy jammers.
- Tri-band versatility: Support for 2.4G, 5.2G and 5.8G frequencies makes the system compatible with DJI Mavic 3, 3T, Matrice series, Autel and FPV drones.
- Extreme power 10 W: Output power of 40 dBm per channel allows you to literally “push through” electronic warfare interference and maintain a link where others lose signal.
- Operator safety (20 meter extension): The use of professional RG-8 cable allows the pilot to be in a dugout, basement or armored vehicle, placing the antenna at a safe distance or on a high mast.
- High gain: Antenna gain of up to 18 dBi and total amplifier Gain of up to 22 dB ensure stable HD video transmission at extreme distances.
Technical and tactical characteristics (TTX) of the Berkut SkyRage antenna
The Berkut SkyRage antenna is This is an active system equipped with highly sensitive, low-noise amplifiers (LNA), which guarantees clear signal reception even from a drone located at a great distance.
| Parameter | Characteristic value |
|---|---|
| Device type | Active remote antenna with amplifier |
| Operating frequencies | 2400-2500 MHz / 5000-5875 MHz (Triple-Band) |
| Output power | 2 × 10 W (40 dBm) |
| Gain | 20 - 22 dB |
| Antenna Gain (dBi) | 2.4G - 15 dBi (±1) / 5.8G - 18 dBi (±1) |
| Noise Figure | <2.0 dB (high signal purity) |
| Operating Angles (H/V) | Horizontal: 65° / Vertical: 20° |
| Battery | 7.4 V / 6400 mAh (long battery life) |
| Connector Type / Weight | NK Female / 1680 g |
RG-8 Coaxial Cable Specifications (N-Type)
RG-8 cable is the gold standard for remote antenna systems. Unlike cheaper analogs, it has minimal power loss over long distances, which is critical for maintaining the effect of a 10 W amplifier.
| Parameter | Characteristic Value |
|---|---|
| Cable Type / Length | Coaxial RG-8 Low Loss / 20 meters |
| Connectors | N-Type (Male) - N-Type (Male) |
| Wave Impedance | 50 Ohm |
| Conductor Material | High-quality pure copper (Copper) |
| Shielding | Double: Aluminum foil + tinned copper braid |
| Outer shell | UV and frost-resistant polyethylene (PE) |
| Temperature range | from -40°C to +80°C |
| Bending radius | 51 mm (kink resistance) |
Tactical application and efficiency
The Berkut SkyRage + RG-8 kit is the choice of professional pilots. The system allows you to effectively solve the following tasks:
- Electronic warfare resistance: 10W of power creates a stable communication channel that is extremely difficult to jam with portable or stationary electronic jamming systems.
- Deep reconnaissance: Increasing the flight range allows for reconnaissance deep behind enemy lines without the risk of losing control.
- Stable video: Using the 5.2 GHz frequency often allows for operation in “clear” airwaves, where there is less interference from other means of communication.
- Mobility: Despite its impressive power, the system is easily mounted on a tripod or mast and deployed in a few minutes.
Important: Using a 20-meter RG-8 cable ensures that more than 90% of the amplifier’s power reaches the antenna, unlike thin cables such as RG-58, where losses at such a length can be fatal.