|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
RG-8 N-Type & QMA Tactical Cable Set (2x20m): Security and Power of Your Communications
In today's aerial reconnaissance and electronic warfare environments, the operator's position is the primary target for enemy SIGINT (electronic reconnaissance) assets. RG-8 Coaxial Cable Set (2 x 20 meters) with N-Type & QMA Connectors is designed to provide maximum reach of antenna systems. The 20-meter range allows the crew to remain in a protected shelter, while keeping emitting equipment a safe distance away, a key factor in survivability on the front lines.
Why RG-8 — Is this the gold standard for tactical remote control?
When operating at high frequencies (2.4GHz, 5.2GHz, 5.8GHz), every meter of cable represents potential signal loss. RG-8 cable is classified as Low Loss, which is critical at lengths of 20 meters. Unlike cheap, thin cables, RG-8 ensures that the power from your amplifier (booster) reaches the antenna and isn't wasted. in the conductor.
- Low Loss: A thick, pure copper center conductor and high-quality dielectric provide excellent conductivity.
- Double Shielding: A combination of aluminum foil and dense tinned braid protects the signal from external interference and the active influence of enemy electronic warfare.
- N-Type Interface — QMA: Universal combination of connectors for quick connection to most tactical antennas and modern amplifiers.
- Field resistance: The black polyethylene jacket is resistant to UV, moisture and extreme temperatures (-40~+80°C).
Technical and tactical characteristics of the kit
This kit consists of two identical cables, 20 meters long, which is ideal for MIMO systems (simultaneous transmission of video and control).
| Parameter | Characteristic value |
|---|---|
| Cable type | RG-8 (High-frequency coaxial) |
| Wave impedance | 50 Ohm (RF communication standard) |
| Length of one cable | 20 meters |
| Quantity in the kit | 2 pcs. (40 meters in total) |
| Connector type | N-Type (Male) — QMA (Male) Quick-Lock |
| Inner Conductor | Solid Copper |
| Dielectric | Foamed PE |
| Temperature Range | -40°C to +80°C |
Compatible with AvengeAngel Big Hulk plus systems
This cable set is specially adapted to work with the most powerful signal amplifiers on the market. It is an ideal component for the following systems:
- AvengeAngel Big Hulk plus (known as AVENGER and BOOSTER);
- Frequency ranges: 2.4G, 5.2G, 5.8G;
- Remote antenna systems for amplifying UAV signals over long distances.
Comprehensive solution: For maximum efficiency, you can purchase a complete kit from us: the AvengeAngel Big Hulk plus remote antenna with a charger and this set of RG-8 N-Type-QMA cables. This ensures perfect matching of equipment and maximum communication range.
Advantages of the QMA (Quick-Lock) connector in combat
Unlike threaded connections (SMA), the QMA connector allows you to connect or disconnect the cable in one movement. This is critical when you need to quickly change position (tactics "hit-and-go" when you only have seconds to fold up the equipment.
- Speed: Instant locking without the need for threading.
- Reliability: The latching mechanism prevents accidental disconnection when pulling on the cable.
- Convenience: Can be used with tactical gloves and in difficult weather conditions.
Conclusion: Reliable communication is the key to mission accomplishment.
The 20m RG-8 N-Type-QMA cable set is not just an accessory, but a vital tool for professional UAV operators. High quality workmanship, low signal loss, and tactically convenient connectors make this set the best choice for work in areas where electronic warfare is actively countered.
FAQ: Six questions about the RG-8 set (20 m, N-Type - QMA)
1. Why was RG-8 cable chosen for a 20-meter distance?
RG-8 is a Low Loss cable. Over a length of 20 meters, thin cables lose too much power. The thick central core and shielding of RG-8 allow the signal to be delivered to the antenna with minimal attenuation, ensuring a stable connection.
2. Why are two 20-meter cables included in the kit?
The kit is designed for MIMO $2 \times 2$ systems. Most modern antennas transmit data in two planes simultaneously. A pair of identical cables guarantees the same signal characteristics for both channels, eliminating desynchronization.
3. What is the logic behind using N-Type and QMA connectors?
N-Type (threaded) is installed on the external antenna - it is sealed and reliable in the wind. QMA (quick-release) is connected to the remote control or booster - it is fixed with one click, which allows you to instantly deploy the position without twisting the threads.
4. Pilot safety when extending the antenna 20 meters?
This is a matter of survival. A distance of $20\,\text{meters}$ allows the operator to remain in cover while the antenna is working outside. The enemy can detect the antenna, so this distance saves lives in case of a retaliatory strike on the signal source.
5. What are the specifics of using RG-8 cable in the field?
The cable is thick and durable. The jacket is resistant to sun and abrasion. The main thing is not to bend it at sharp angles (bending radius of at least 15 cm) to maintain the wave impedance.
6.Are amplifiers (boosters) required with this kit?
At 20 meters, attenuation is always present. For maximum range and video quality, it is recommended to install active boosters directly in front of the antennas. In this setup, RG-8 cable acts as the perfect high-speed highway for your signal.