|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
WARMAX Wired Repeater for Amplifying and Extending Antenna Cables (10W, 2.4/5.8 GHz)
In modern electronic warfare, the distance between the operator and the antenna often becomes a matter of survival. However, the use of long coaxial cables inevitably leads to signal attenuation, which nullifies the work of even the most powerful amplifiers. WARMAX Wired Repeater is specialized tactical equipment designed to compensate for cable losses and re-amplify the signal. It allows the operator to be in deep cover while maintaining maximum output power on the radiating antenna.
Why do you need a WARMAX repeater in tactical conditions?
The main problem when working from dugouts, basements or bunkers is The need to extend the antenna a significant distance (30, 50, or even 100 meters). Without a repeater, the signal from the remote control simply "dies out" in the wire, never reaching the amplifier on the antenna. WARMAX solves this problem by providing 10 W of power for each of the main bands, which allows operation at distances of up to 20 km.
- Attenuation compensation: Full restoration of signal strength after passing through long cable routes.
- Maximum security: Allows the operator to be in a protected area while the radiating antenna is operating at a remote point.
- Protocol versatility: Full compatibility with Wi-Fi control and digital video transmission OcuSync (DJI, Autel).
- Extreme protection: The IPX68 standard guarantees operation of the device in heavy rain, mud or in very dusty conditions.
Technical and tactical characteristics (TTX) of the WARMAX repeater
Repeater Built on high-quality LDMOS amplifiers that ensure stable operation over a wide temperature range and under high loads.
| Parameter | Characteristic value |
|---|---|
| Operating frequencies | 2.4 GHz / 5.8 GHz (Dual-Band) |
| Amplifier Power | 10 W (per band) |
| Range | Up to 20 km (depending on conditions and antenna) |
| Connector Type | NK Female (professional standard) |
| Casement Protection Class | IPX68 (fully sealed) |
| Battery | Built-in, up to 3 hours of battery life |
| Compatibility | Wi-Fi, OcuSync (DJI, Autel, FPV) |
Compatibility with professional antenna systems
The WARMAX repeater is designed as a universal link for working with the most powerful remote systems on the market. It is a perfect match for the following models:
- WARMAX Booster 2.4G/5.2G/5.8G: Native compatibility for creating ultra-powerful systems.
- Avenge Angel Big Hulk Plus: Signal boost for the legendary Avengers.
- Berkut SkyRage 10W: Tri-band operation for maximum interference immunity.
- MAVKA, ROC4, NINJA (N-Type) series: Reliable power and amplification for tactical 10W series.
- ACASOM ROC6 (20W): Using the repeater as an intermediate link to compensate for attenuation before the flagship amplifier.
Operational Benefits and Reliability
The aircraft-grade aluminum housing of the repeater effectively dissipates heat, allowing the amplifiers to operate at peak loads without reducing efficiency. The presence of a built-in battery provides 3 hours of autonomous operation, which allows the system to be used even in the event of temporary damage to the main power lines.
Advice from communications experts: For best results, install the WARMAX repeater closer to the antenna if the cable length from the console exceeds 20-30 meters. This will ensure the supply of a clean, already amplified signal to the final emitter.
Conclusion: Technological security of your unit
The WARMAX wired repeater is a critical element for unitswho value personnel safety and UAV operational efficiency. It transforms a conventional remote antenna into a powerful long-range communications system capable of operating in the most challenging electronic countermeasures environments.
Tactical FAQ: Six Questions About the WARMAX Repeater
1. Why do you need a repeater if you already have a powerful antenna and booster?
This is where physics comes into play: high frequencies (2.4/5.8 GHz) quickly "attenuate" in copper cable. If you run 20 meters of wire, half the signal will be converted into heat. The WARMAX repeater compensates for these losses by "boosting" the signal in the cable. Just like in anatomy: the heart pumps blood (the signal) through the vessels (cables) so that it reaches the antennas under the right pressure.
2. To what real distance can the cable be "extended"?
The usual limit without a repeater is 5-10 meters. With a WARMAX repeater, you can confidently extend the antenna to 20, 30, or even 50 meters. This allows you to sit in a deep basement or dugout, while your antenna operates on a high mast off to the side.
3. Does a repeater affect control latency (ping)?
For a pilot, latency is as critical as reaction speed in Bannerlord. The repeater operates at nanosecond speeds, so you won't notice any lag. Video will remain smooth, and stick response will be instant. This is a professional solution for dynamic flights.
4. Powering the repeater in the field?
The unit is powered via a cable or a DC connector. Your EcoFlow Delta 2 station is the ideal source. Consumption is minimal, so the repeater has almost no effect on the system's operating time, but significantly increases its reliability.
5. Why is a repeater your main insurance against direction finding?
When operating, the antenna emits a powerful radio signal that is visible to enemy reconnaissance. Thanks to the repeater and a long cable, the radiation occurs 30 meters away from you. It's like remote surgery: you perform the manipulations, but you yourself are not in the risk zone of "flying in" at the emission point.
6. Is WARMAX compatible with other types of antennas and remote controls?
Yes, the repeater is universal. It works with any remote control (DJI, Radiomaster) and antennas. For a photographer, it's like a universal lens adapter:One accessory opens up possibilities for all your devices. It's just important to use high-quality connectors.