|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
DJI Mavic 3 Enterprise Series Battery Kit: Guaranteeing Continuous Aerial Reconnaissance
In today's combat environment, the success of an operation depends directly on a unit's ability to conduct 24/7 monitoring. DJI Mavic 3 Enterprise Series Battery Kit is a critical kit for professional UAV crews, ensuring continuous flight. The presence of additional batteries and a high-power charging hub allows for rapid battery rotation, maintaining the "eyes" of the drone. in the sky without pausing for recharging.
The kit is designed specifically for the Enterprise series (Mavic 3E, Mavic 3T), where the intensity of use and the requirements for power reliability are extremely high.
Composition and advantages of the tactical power kit
By choosing the original Battery Kit, you get full compatibility with DJI Enterprise firmware and guaranteed voltage stability even during intensive maneuvering or countering electronic warfare.
- Long battery life: Three intelligent batteries provide a total of more than 2.5 hours of flight time (depending on conditions).
- Fast charging 100 W: The updated CHX265-100 charging hub allows you to charge batteries sequentially with maximum efficiency, which is critical when operating from a generator or portable charging station.
- Smart BMS system: Each battery independently monitors the condition of the cells, temperature and cycles, preventing overcharging and deep discharge in field conditions.
- Mobility and lightness: The charger weighs only 116 grams, which allows you to easily place the kit in a tactical backpack.
Technical and tactical characteristics (TTX) of the kit
Each element of the kit meets high reliability standards, ensuring operation in a wide temperature range.
1. Intelligent Flight Battery (BWX260-5000-15.4)
| Parameter | Characteristic value |
|---|---|
| Model | BWX260-5000-15.4 |
| Capacity | 5000 mAh |
| Battery type | LiPo 4S (Lithium polymer) |
| Weight | 335.5 g |
| Voltage | 15.4 V |
| Charging temperature | from +5° to +40° C |
2. 100W Charging Hub (CHX265-100)
| Parameter | Characteristic value |
|---|---|
| Model | CHX265-100 |
| Power | 100 W (PD protocol) |
| Charging time Battery | ~1 hour 10 minutes (with 100W adapter) |
| Input current | 5–20 V, max. 5 A |
| Dimensions | 150x55x28 mm |
| Weight | 116 g |
Expert tips for front-line operation
To preserve battery life in challenging conditions, we recommend following these rules:
- Warming up in winter: At temperatures below +5°C, be sure to warm up the battery in an internal pocket or using thermal covers before takeoff.
- Charging sequence: The CHX265-100 hub charges batteries sequentially - from the one with the most charge to the least charged. This allows you to prepare at least one aircraft for departure as quickly as possible.
- Storage mode: If the kit is not used for more than 10 days, the intelligent system will automatically discharge the batteries to 60% to prevent cell swelling.
Important:The maximum charging speed (~70 min) is only achieved with the proprietary DJI 100W USB-C adapter. Using weaker power supplies will significantly increase the crew's downtime.
Conclusion: Your Information Dominance
The DJI Mavic 3 Enterprise Series Battery Kit is not a luxury, but a necessity for any reconnaissance unit. The combination of three heavy-duty batteries and a high-speed hub ensures cycling, which is key to detecting and tracking targets in real time.
Tactical FAQ: Mavic 3 Enterprise Series Power Kit
1. What's in the kit and what's the benefit?
The kit includes 3 BWX260-5000-15.4 batteries and a 100W charging hub. Three batteries are the base for the "carousel": one in the sky, one cooling down, one charging. This is your insurance policy against the drone remaining on the ground at the most crucial moment.
2. The advantage of a 100-watt hub?
It's speed. The Enterprise Series hub charges the battery to 90% in 45-50 minutes. In combat conditions, when you need to quickly raise your "eyes" again, these saved 20 minutes can decide the outcome of the operation. This is your "energy pit stop."
3. Compatible with regular Mavic 3s?
Yes, they are interchangeable. The batteries fit the entire Mavic 3 series. You can use them as a common fund for any "birds" in the unit. The main thing is to use a powerful power supply for the hub so as not to lose charging speed.
4. Powered by your EcoFlow Delta 2?
Your EcoFlow Delta 2 will handle 10-12 full charges. That's 2-3 days of autonomous operation for the group. While the drone is charging, you can calmly prepare for Krok 1 on your laptop - there's enough power for everything.
5. Why do you need Storage Mode (60%) in a dugout?
A full charge of 100% is a risk. If hit by shrapnel, such a battery burns like thermite. BMS automatically discharges them to 60% in a couple of days. This extends the life of the "chemistry" and protects your shelter from fire. Safety is discipline.
6. How to monitor battery wear?
Check the cycles on the ASUS TUF. After 200-250 flights, the capacity drops. Tip: Number the batteries with a marker. This will ensure even loading and will help you spot a "weak link" early, which should no longer be allowed to penetrate deep into enemy territory.