|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
6s4p 16000mAh FPV Drone Battery: Power for Ultra-Long-Range and Heavy-Duty Missions
In today's aerial reconnaissance and strike missions, airtime is critical. The 6s4p 16000mAh battery pack is an extreme-grade power solution designed for heavy-duty FPV platforms (10-13 inches) and repeater drones. With its enormous energy reserves and ability to withstand high discharge currents, this battery enables missions to be carried out at distances previously considered unattainable.
We use only proven high-current Li-ion cells, which allows us to obtain a stable voltage without critical sags, even during intensive maneuvering with a full combat load.
Key advantages of the 6s4p 16000 mAh assembly
This battery is designed for professional crews operating in difficult conditions and requiring maximum reliability of each power unit.
- Extreme capacity (16 Ah): Allows you to increase the range of the drone by 2-2.5 times compared to standard assemblies, which is critical for deep reconnaissance behind enemy lines.
- High discharge current (180 A): 4P configuration (four parallel lines) delivers tremendous power, allowing you to confidently handle heavy payloads.
- Reinforced power section: The use of an extra-thick 10AWG cable minimizes resistance and prevents wires from overheating under peak loads.
- Low internal resistance: A figure of ~8.5 mΩ indicates high build quality and minimal energy loss due to heating.
Technical and tactical characteristics (TTX)
The battery meets the most stringent quality standards. Each unit is tested for internal resistance and capacity before shipping.
| Parameter | Characteristic value |
|---|---|
| Configuration type | 6S4P (Li-Ion) |
| Nominal capacity | 16000 mAh (16 Ah) |
| Nominal voltage | 22.2 V (3.7 V per cell) |
| Maximum voltage (charge) | 25.5 V (4.25 V per cell) |
| Discharge current (Max) | 180 A |
| Charging Current | 8 A |
| Internal Resistance (Impedance) | ~8.5 mΩ |
| Operating Temperature | from -20°C to +60°C |
| Power Cable / Connector | 10AWG / XT60 (XT90 available upon request) |
| Assembly Weight | 1740 g |
Optimized for combat conditions
The 6s4p 16000 mAh battery is designed for intensive use in various climatic zones:
- Winter operations: Thanks to a stable chemical composition, the battery remains operational at temperatures down to -20°C, which is important for uninterrupted reconnaissance operations in winter.
- Reliable contacts: The JST-XH balancing connector and power wiring have additional insulation that is resistant to mechanical damage and vibration during flight.
- Flexibility of use: The large weight (1740 g) is offset by a record-breaking energy capacity, making this battery ideal for repeaters that must remain in the air at altitude for hours.
Expert advice: Due to the high capacity of the battery, it is recommended to use chargers with a balancing power of at least 100W to ensure an even charge across all cells. Store the batteries in Storage mode (3.8V per cell) if flights are not planned for the next few days.
Why choose our 6s4p battery pack?
Unlike mass-produced Chinese counterparts,We pay attention to every connection:
- Professional welding: Using wide nickel tape ensures unimpeded passage of 180 A current.
- Quality control: We do not allow the use of elements with different internal resistance in the same assembly.
- Safety: Reliable fixation of cells inside the assembly eliminates short circuits during hard landings.
Conclusion: Maximum possibilities for your "birdie"
6s4p 16000 mAh battery is the choice for those who are not used to limiting themselves in range. This is a reliable source of energy that will allow your drone to fly further, see more and is guaranteed to reach the target. When every minute of flight is Whether it's saved lives or destroyed enemy equipment, choose enhanced power.
Tactical FAQ: Energy "heavyweight" 6S4P 16000 mAh
1. Why is the 6S4P the choice for 20+ km missions?
The 16000 mAh battery allows you to fly twice as long as regular drones. For you, it's like a battery grip on a camera: you can wait for a long time for a target without panicking that the charge will run out in 5 minutes. This is your "long meter" in aerial photography of the front.
2. What elements can handle up to 180A?
Molicel P42A or Samsung 40T are used. In a 4P configuration, they deliver up to $200\text{ A}$ at peak. A heavy 10-inch drone with such a battery will be able to sharply climb even with a 3-kilogram BC. It's like a powerful engine on a loaded van - it will pull any hill.
3. Weight 1.7 kg and the inertia of a "bomb carrier"?
The battery weighs as much as two liter bottles of water. This creates enormous inertia. As a future medic, you know: mass x speed = momentum, which is difficult to extinguish. The drone is clumsy. Take into account the altitude drop when maneuvering to avoid hitting the ground prematurely.
4. Charging from your EcoFlow Delta 2?
The battery capacity is approximately $355\text{ Wh}$. Your EcoFlow Delta 2 will provide 2 full charges. Plan your flights with this in mind:For serious work of the "heavy" aircraft, you will need a generator or another station. While the battery is charging, you have time to cram the pharmacology for "Krok 1".
5. Real range with a load of 3.5 kg?
With a heavy load, you have 15-18 min. The operating radius is 15-17 km. In reconnaissance mode, the aircraft "hangs" for up to 45 minutes.
6. Safety and 24 elements in a bundle?
The more cans, the higher the chance of imbalance. A single cell failure can burn out the entire "cell." Monitor your cells in the OSD menu on your ASUS TUF laptop. Remember: extinguishing 24 burning lithium cells is nearly impossible—store them in an iron box away from people.